2.4G Wireless Pattern Pen With Solar Charger

Specifications:

Frequency 2414Mhz(CH1)
Audio subcarrier frequency. 6.0Mhz
Antenna Built-in 2.4G antenna
RF Output power 10mW
Transmitting Range 300 feet in line of sight
Sensor 1/4 CMOS color
Resolution NTSC:510X490; PAL:380X296
Horizontal resolution NTSC:380 TV line; PAL:240 TV line
Minimum illumination 2.0lux
Built-in mic. 55dB high sensitivity
View angle 60 degree 
Li-battery capacity 110MAH
Operating time 1 hour
Charge time 15 minutes
Operating voltage DC 5V
Operating current 95MA
Solar charger high capacity built-in   Li-battery 1350MAH: it can discharge 
9 times for transmitting operation up to 9 hours for this WP-620
Solar energy board  5.5V/80MA
Color red/blue/black
weight 70g
Dimensions( LX D) 14.80X1.40 cm

Usage:

Please charge your solar charger before use by using one of the following three methods;
(A) Place the charger in a place where direct sunlight is projected , thus, solar
    energy will be transformed to electric   energy, which is used to charge the
    built-in rechargeable battery.
(B) Connect the charger with a computer through a USB cord and you’ll see the red
    indicator is on, which means charging is under way; The indicator turns green when
    the charger is fully charged. The charging time for full   capacity is about 2 hours.
(C) Charge the charger through an AC adaptor, and you’ll see the red indicator is on,
it turns green when the charger is fully charged. The charging time for full capacity is about 1.5 hours.

Parameters:

Solar  charger          
Power  Source DC 5V 200mA
Power output  DC 5V 200mA
Li-battery 1350MAH
Dimensions (WxDxH) 43mm×98mm×13mm
Weight 66g

Accessories:

Package:

Color gift box