GSM Alarm System

Introduction:

The PATROL HWAK alarm system adopts SMS data transmission and voice platform of GSM network to send control command and receive alarm remotely. The system can be set delayed-arm. When a signal is detected by detectors, the detectors will send alarm signal to host immediately, then the host sends alarm SMS to its pre-set mobile phone numbers, and meanwhile dials its pre-set telephone/mobile phone numbers automatically and drive wiretap. In addition, users can dial the system and set it in arm/disarm mode by any remote phones.

Main Function

 SUPPORT WIRED AND WIRELESS DETECTORS

1.Adapt wavecom double frequency GSM module.

2.9 wireless guarding zones( 1 SOS alarm zone, 1 fire alarm zone, 1 external power failure alarm zone, the other 6 wireless guarding zones can be defined by user), 2 hardwire guarding zones.

3.Send SMS to 3 mobile phones automatically while alarming.

4.Call 3 phones automatically while alarming and drive wiretap.

5.Arm/disarm by wireless keyboard, remote controller, SMS or remote telephone/mobile phone.

6.Set the host by wireless keyboard, SMS or remote phone.

7.Report guarding zones remotely by SMS or voice.

8.Modify the name of wireless guarding zones and inquire the status of host by SMS demand.

9.With voice reminder while the host is working.

10.Support dialog.

11.With standby rechargeable battery.

12.The alarm host automatically stores system status, while its power is off.

13.Connect with the alarm center through GSM network.

Specification:

* Zone

   2 hardwire, 8 wireless

   Working frequency between detector and alarm host  (315M/433M optional ).

* GSM

   GSM frequency: 900/1800MHz & 850/1900MHz  (optional)

   The GSM frequency of model no.G10E: 900/1800MHZ

   The GSM frequency of model no.G10EA: 850/1900MHZ

* LED
   Eight controller works LED
* External power failure alarm
  Start-time: less than 1s

* Alarm response time

 Less than 10s (GSM in normality)

* Power

Power requirements: AC 220V 50Hz (optional)

Power consumption：less than 3W

Standby battery：DC 8.4V

Standby battery working hours: more than 10 Hours

* Working conditions

Operating temperature:  -20 to 60℃
  Humidity: 20% to 95%

* Weight

   Net weight: 0.5Kg
   Gross weight: 0.75Kg
* Dimension

Dimension: 180mm(Long)×130mm(Wide)×32mm(High)

Packaging

·One Alarm Host

·One Wireless PIR motion sensor

·One Magnetic door/window contact

·Two Remote controllers

·One Keyboard

·One Siren

·One AC Adapter

·One Manual