Fingerprint car alarm system

1. Living-fingerprint identification

As the device encrypts the anti-theft system of the vehicle through the living fingerprint, defects

that the password can be decodes in the system can be eliminated and nobody can drive your car

if your fingerprint data is not input to start it. 

2. Automatic car start

After you insert the key into the keyhole and turn it to the ON position, you should input the

correct fingerprint so that the car’s alarm state can be cancelled and car started (only after you

install the system and set the anti-theft item, can this function be available).

3. Cancellation in emergency

This product is defaulted to anti-theft mode when delivered. You can enter the attached password

through the keypad and cancel the anti-theft mode of the system by following the voice prompts.

After that, your car can be started without fingerprint identification, which can make it more

convenient in maintenance work or car washing.

4. Quick alarm

If the anti-theft mode is enabled and no correct fingerprint data are entered within 60 seconds

(this time can be adjusted, and the voice prompts will be heard every ten seconds), and the key is

used to start the car directly, the system will alarm with sound and light and stop the starting. 
 
5. Automatic locking

Each time the engine is extinguished, the system will automatically lock the start-up circuit in a

cyclic manner.

6. Anti-robbery function

The system defaults the third fingerprint of the first group as anti-robbery fingerprint. In

emergency cases, you can use this fingerprint to start the car so as to get more time to escape. In

this mode, the car’s electric part will be automatically shut off within the set time (adjustable,

default as 10 minutes), whereas the oil supplying is under way, and alarms with sound and light

will frighten the robbers and force them to park at the road side. Finally, the oil supplying will stop

and the car can’t be started any more. In this state, even the correct fingerprint data can’t work,

and only after the correct password is entered through the keypad, can the alarm state be

cancelled.

7. Nine fingerprints in three groups can be stored

You can set for the system nine fingerprints in three groups by following the voice prompts (each

group can store three different fingerprints).

8. Quick start after engine extinguishing

For an unskillful driver, if the car engine extinguishes because of improper operation when waiting

for the traffic light at the crossroad, he can turn the key to ACC position and then to the start shift

to start the car manually. This process lasts 10 seconds. (This ten-second chance is only provided

after you input the correct fingerprint to start the car for the first time. It is used to help you save

time when you have wrong operations during driving). If the time is exceeded, you have to input

the fingerprint again to start the car (turn the key to OFF position, and then to ACCON position,

and the system will send out the voice prompt “input fingerprint”).